Since you're looking for a simple article about "What is 'auger drilling'", you've found the right place.
And the quick answer isβ¦
A method of drilling in which penetration is accomplished by the cutting or gouging action of chisel-type cutting edges forced into the substance by rotation of the auger bit.
Auger drilling is a method for installing auger piles and is usually done for drilling in minor depths through loose rock.
Installing the piles via auger drilling helps in balancing the load of a construction in deeper soil layers.
Auger drilling is largely free from vibration and noise, which is why the technique can also be used in urban areas.
Do you know what makes people curious? Here are a few questions and answers:
Auger drilling
What is the depth of hole made by Auger...
The depth of holes made by hand operated augers is about 30 m. The use of augers in boring is suitable for all types of soil except gravels and boulders. To add more, auger boring is the cheapest way to advance a borehole into the ground. Other type of auger; hollow stem auger is that type of device which acts as its own casing.I hope you found the information you were looking for. If you didnβt, just make a comment below.
Note: This is a draft for a new post.
COMMENTS