What is 'auger boring' 🧑‍🔧

Welcome my friend! The purpose of this article is explain “What is 'auger boring'” by answering common doubts.

A quick answer is…

The hole drilled by the use of auger equipment.

Auger boring is defined as a trenchless application in which a casing pipe is jacked into the earth’s surface while simultaneously rotating helical augers remove the excavated spoil.

Auger boring works using Archimedes Screw Principle.

In Archimedes’ application, a helical surface surrounding a hollow cylindrical shaft (screw) is rotated either manually or by motors.

I have selected a few questions and answers to help you understand it:

Auger boring

Do I need a geotechnical report for auger boring...

Since ground conditions are a significant component of auger boring, it is essential that a geotechnical report form part of all auger boring projects. Auger boring machines are generally designed for casing pipes that range from 102 mm to 1830 mm in diameter and span distances of approximately 200 m.

What is auger boring and how does it work...

“Auger boring is a technique that removes the soil and installs a pipe or casing so you don’t have any road upheaval or soil subsidence,” says McLaughlin president Dave Gasmovic. “Auger boring is ideal for pipe up to 60 in. in diameter and bores up to 600 ft long.

What is a post hole auger used for...

The examination of the sub-soil conditions for simple buildings to be erected in clayey or sandy soil can be best performed by a post hole auger. The auger is held vertically and is driven into the ground by rotating its handle by applying leverage.

If you still haven’t found what you were looking for, be sure to drop me a message in the comments section below, ok?

Note to self: Outline for a post.